A Knotted Up Mess!!! (pt.1) –by Theron Asbery
Here is an on-going topic for debate in fishing; what knot to tie and when?
The number of knots out there to use and why they are better than the rest, is about as spread out as the number of different hardbaits on the market. For some anglers, they are very particular and picky about their knots. Some use a knot their grandpa taught them how to tie, and grandpa knew everything. Some use a particular knot that they used to win a tournament. Others use a certain knot because it has never broken on them. Finally, there is the anglers that tie any knot that the spirit moves them to tie; whatever the case may be, there is a lot of options.
I’ve spent ten years as a competitive bass angler, five of which have been competing on the FLW Tour. Here is my approach to the different knots out there and when to use them. The first piece of advice I can give every angler out there, keep it simple! I stick to three basic knots in my fishing arsenal and I have yet to find a reason to change. I’ve also added some value from Yo-Zuri prostaff members to help increase the incentive behind the way I like to do things.
The first knot is the Palomar knot, probably one of the easiest but also one a lot of anglers have controversy over. Growing up in Oklahoma and fishing a lot with my dad, the Palomar knot was the first knot I learned to tie. However, I did break off a lot, but it was the only one I knew how to tie. It was not until I started competing in tournaments and reading a lot of article in magazines did I start learning how to tie different variations. The Palomar is still a knot I depend significantly on when fishing with Yo-Zuri Superbraid.
“The Palomar knot is as old as my fishing career. In Florida we fish a lot of grass, and I think the Palomar knot favors the best. Although it has a tendency to cut itself when tied with fluorocarbon, I think it holds the best strength with braid. Also it’s a smaller knot which cuts down the tendency on your bait getting hung up on debris in the water.” –Mike Surman, FLW Tour pro & Yo-Zuri prostaff member
The knot I rely on 90% of the time is the San Diego Jam knot, or as some like to call it “the Jam knot”. This is the knot I especially tie when throwing Yo-Zuri crankbaits such as the 3DB Deep Crank or 3DR Mid Crank because both are worked especially well when in contact with wood or rocky bottoms. The amount of abuse you put your knot and line through in this scenario is endless, so a quality line and knot is paramount. Yo-Zuri TopKnot fluorocarbon is the best on the market and I’ve found the best knot to tie to hold up well and be the strongest is the San Diego Jam. It has three tag ends and pretty simple to tie, however the key to tying it correctly is like most any other knot, make sure to wet it down before you cinch it complete.
“Most of the anglers I know are tying the San Diego Jam for everything. I’ve never had that knot slip or break on me. In my line of work if it isn’t broke, then don’t fix it.” –Clent Davis, Yo-Zuri prostaff
Finally, there is the knot everyone has to use to connect a mainline to a leader. Personally I like the Alberto knot. Again, this was the first knot I learned to tie when adjoining two different lines and it has not failed me yet. It is a pretty thin knot and holds up well for smaller diameter braid and fluorocarbon. It is a knot that wraps the mainline up to sixteen times around the leader material, so it has an excellent hold when all cinched down.
“I’ve found the quickest and strongest conjoining knot to tie, especially when finesse fishing, is the Alberto knot. I’ve caught ten pounders on shakey heads before, and never once had a single issue with the Alberto knot.” –Luke Clausen, Yo-Zuri prostaff & Major League Fishing BPT pro
However, there is a new knot that has really shown itself and made a name for itself among anglers on the tour level; the FG knot. This is knot is relatively difficult to tie and will take a lot of practice to getting the hang of. It was originally designed by tarpon and redfish anglers in the state of Florida but has eventually made its way to the freshwater scene. Again, this is a very thin knot and has a great strength. I would recommend searching YouTube and seeing some different videos on how to tie it. It works very similar to a Chinese Finger Trap, I’ve even heard of guys using it for Crappie fishing and not having to retie for months and months at a time.
“The FG Knot is my favorite when tying braid to fluorocarbon. Although I recommend taking your time and sitting down in the bottom of the boat to tie it, I’ve exclusively started depending on it.”- Brandon Cobb, Yo-Zuri prostaff and BASS Elites Series Angler
Here is just a couple examples of the different knots out there anglers love to use. I have my personal favorites, and every angler out there has their own. No matter what an angler prefers to tie, the key is to have confidence in the knot you rely on!!!
Next week we will feature pt.2 which will cover knots preferred in saltwater fishing. Think it is the same as freshwater???